Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Top 10 Best Cam For 350 With Vortec Heads With Buying Guide
Kevin G. McNeil
Editor-in-Chief at - Sharpened KnifeFirstly, Thanks For Visiting Our Website. We Developed this Data-driven Assistance Website to find & Analysis the Best Products in Every Category. So that You can perform hassle-free shopping. Enjoy Your Stay... If you have any questions or suggestions, please write us at contact@sharpenedknife.com
Last Update:
Our team studied on 53670 reviews available online for Cam For 350 With Vortec Heads, chose the finest ones and prepared Cam For 350 With Vortec Heads Reviews for you. It was very difficult to shortlist the ideal Cam For 350 With Vortec Heads from thousands of products online. However, We tried to make sure that you get only the Best Cam For 350 With Vortec Heads from our suggestions. Check our listings-:
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases, and this is at no extra cost to you. This act of kindness motivates us to grow our website more. Thanks for your support.
Comparison Chart for Best Cam For 350 With Vortec Heads
We found 53670 reviews when researching. We have considered users feedback on the Cam For 350 With Vortec Heads and our suggestions includes only the finest of them in this article.
| No | Product | Score | Action |
|---|---|---|---|
| 1 | Flotek Cylinder Head, Assembled | 9.8 | Check On Amazon |
| 2 | 2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc | 9.6 | Check On Amazon |
| 3 | A-Team Performance Complete Distributor Compatible with Chevy GM EFI VORTEC 1996-2002 Small Block 5.0L 5.7L 305 350 Tahoe C1500 K1500 C2500 K2500 Black Cap | 9.4 | Check On Amazon |
| 4 | Edelbrock 2701 Performer Intake Manifold | 9.2 | Check On Amazon |
| 5 | 4929 Valve Spring Height Micrometer Measurer | 9 | Check On Amazon |
| 6 | Edelbrock 5089 Cylinder Head | 9 | Check On Amazon |
| 7 | New Pushrod Length Checker 6.80" to 7.80" Push Rod 7702-1 | 9 | Check On Amazon |
| 8 | Fel-Pro ES 72856 Cylinder Head Bolt Set | 9 | Check On Amazon |
| 9 | Z Whip LS Cylinder Head Dowel Alignment Pin Assembly Split Roll Pin Compatible with all GM Chevy 1997-Current LS & LT Series Engines LSX LS1 LS3 LS2 LQ4 LS6 LQ9 5.3L 6.0L 6.2L L83 L86 LT1 LT4 Vortec | 8.8 | Check On Amazon |
| 10 | DNA Motoring CYLH-SBC-350 Aluminum Bare Cylinder Head Compatible with SBC Engines 302 | 8.2 | Check On Amazon |
Table Of Content:
- Flotek Cylinder Head, Assembled, 2.020/1.600 in Valves, 180 cc Intake, 64 cc Chamber, 1.460 in Springs...
- 2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc...
- A-Team Performance Complete Distributor Compatible with Chevy GM EFI VORTEC 1996-2002 Small Block 5.0L...
- Edelbrock 2701 Performer Intake Manifold
- 4929 Valve Spring Height Micrometer Measurer, Black Aluminium, 1.600"-2.200" Height Range Precise Readings...
- Edelbrock 5089 Cylinder Head
- New Pushrod Length Checker 6.80" to 7.80" Push Rod 7702-1
- Fel-Pro ES 72856 Cylinder Head Bolt Set
- Z Whip LS Cylinder Head Dowel Alignment Pin Assembly Split Roll Pin Compatible with all GM Chevy 1997-Current...
- DNA Motoring CYLH-SBC-350 Aluminum Bare Cylinder Head Compatible with SBC Engines 302, 327, 350, 383
1. Flotek Cylinder Head
- product type: auto part
- package quantity: 1
- made in united states
- package dimensions: 24.1″ (l) x 10.7″ (w) x 8.6″ (h)”
- Fit type: Universal Fit
2. 2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc
- High grade aluminum, bronze valve guides, hardened seats, advance port design for greater air flow
- This head is 200cc intake runner with a 68cc combustion chamber, 68cc combustion chambers improve performance and retains stock compression on 1970 and earlier.
- Intake Valve Diameter: 2.020″ ; Exhaust Valve Diameter: 1.600″ ; Intake Port Volume: 200cc
- Combustion Chamber Volume: 68cc ; Intake Port: Square ; Exhaust Port: Square
- Lighter than Iron Heads. Each Head weighs 10.33kg ; 3-Angle Valve Seat ; Spark Plug Angle : Straight
3. A-Team Performance Complete Distributor Compatible with Chevy GM EFI VORTEC 1996-2002 Small Block 5.0L 5.7L 305 350 Tahoe C1500 K1500 C2500 K2500 Black Cap
- Direct Replacement — Direct EFI distributor replacement for stock units with improved features such as Zinc-coated steel hold down clamp for a secured fit.
- Specifications —Magnetic Pick-Up Trigger, Computer-Controlled Advance Type, Crab-Style Female Cap, and 6 Cylinders.
- CNC-Machined — High-quality EFI distributor with CNC-machined aluminum housing, steel internal, and chromoly steel gear material construction.
- Compatible With — Chevy / GM 5.
- Package Inclusions — 1 x A-Team Performance Complete Distributor Compatible with Chevy GM EFI VORTEC 1996-2002 Small Block 5.
4. Edelbrock 2701 Performer Intake Manifold
- Made of aluminum with a natural finish
- Dual plane intake style
- RPM range is idle to 5, 500 RPM
- Single carburetor without EGR
- Use on stock or original equipment standard deck
- Fit type: Vehicle Specific
5. 4929 Valve Spring Height Micrometer Measurer
- FUNCTION–Measure installed valve spring height conveniently and accurately.Covers most V8s.
- USE INSTRUCTION–You install our 4929 Height Mic just like you would a valve spring, then expand the tool until it has seated the valve, locks and retainer.
- PRECISE READING– 4929 Valve Spring Micrometer with ultra precise readings can measures 1.
- HIGH QUALITY– Made of high quality carbon steel with black finish, great strengh and light weight , anti-corrosion , durable to use and no deformation.
- 100% SATISFACTION GUARANTEE:–If you’re not 100% satisfied with our E-cowlboy 4929 Valve Spring Height Micrometer, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty.
6. Edelbrock 5089 Cylinder Head
- Complete Pair For Hydraulic Flat Tappet
- 64cc Combustion Chamber Volume
- 2. 02cc Intake/60cc Exhaust Runner Volume
- 2. 02 in. Intake/1. 6 in. Exhaust Valve Diameter
- 0. 562 in. Deck Thickness
7. New Pushrod Length Checker 6.80″ to 7.80″ Push Rod 7702-1
- Pushrod Length Checkers are crafted from a steel alloy with black oxide coating
- They are easy to read and eliminate the need for expensive calipers.
- Having the correct pushrods in your engine is a critical factor in proper rocker arm geometry, and this is the best tool to measure pushrod length.
- Individual Length Checker Adjustable Range: 6.800″ to 7.800″
- Package including: 1 X Pushrod Length Checker
8. Fel-Pro ES 72856 Cylinder Head Bolt Set
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Properly torque bolts per manufactures specifications
- Follow recommended tightening sequence for head bolts
- Check bolt length for correct application needed
- Follow all vehicle manufacturers recommendation procedures for head bolt replacement
- 1 year manufacturers warranty
9. Z Whip LS Cylinder Head Dowel Alignment Pin Assembly Split Roll Pin Compatible with all GM Chevy 1997-Current LS & LT Series Engines LSX LS1 LS3 LS2 LQ4 LS6 LQ9 5.3L 6.0L 6.2L L83 L86 LT1 LT4 Vortec
- Set of 4 Steel LS/LT Cylinder Head Alignment Pins
- Compatible with ALL LS/LT Series Engines 1997-Current GEN 3/4/5 LS1, LS2, LS3, LS6, LS7, LS9, GM Vortec 4.
- These are required when installing the cylinder heads to the engine block.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military.
10. DNA Motoring CYLH-SBC-350 Aluminum Bare Cylinder Head Compatible with SBC Engines 302
- REASONABLE DESIGN – High grade aluminum, bronze valve guides, hardened seats and advance port design for greater air flow.
- HIGH PERFORMANCE – The 200cc intake runner with a 68cc combustion chamber improves performance and retains stock compression on 1970 and earlier.
- DURABILITY & USEFUL – The premium aluminum material can bear high pressure and high temperature.
- PRECISE DIMENSION – Under through skillful casting process, the intake valve diameter is 2.
- FITMENT – Compatible with SBC engines such as 302, 327, 350, 383 and 400 small block chevy engines up to 1986.
How To Choose The Best Cam For 350 With Vortec HeadsDoes the thought of finding a great Cam For 350 With Vortec Heads stress you out? Has your mind been juggling between choices when it comes to buying Cam For 350 With Vortec Heads in general, specifically regarding which model to choose?If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Cam For 350 With Vortec Heads for themselves. We understand the stress associated with the buying process!Since you’re here, you are obviously curious about Cam For 350 With Vortec Heads. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.But that’s not always easy, right? That's why we've taken time to compile a list of the best Cam For 350 With Vortec Heads in today's market, on your behalf, so that there will be no more worries for you.How did we come up with the list, you ask? How did we create this buying guide?
- First, our algorithms collected as much information available about these products from trusted sources.
- We employed both Artificial Intelligence and large data volume to validate all collected information.
- Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Cam For 350 With Vortec Heads currently on the market!
- Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
- Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Cam For 350 With Vortec Heads based on that.
- Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
- Customer Ratings: The hundreds of customers using the Cam For 350 With Vortec Heads before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
- Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Cam For 350 With Vortec Heads they used.
- Seller Rank: Now, this is interesting! You don’t just need a good Cam For 350 With Vortec Heads, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
- Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Cam For 350 With Vortec Heads before putting them on the list.
- Durability: Durability and reliability go hand to hand. A robust and durable Cam For 350 With Vortec Heads will serve you for months and years to come.
- Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Cam For 350 With Vortec Heads if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
- Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Cam For 350 With Vortec Heads on the market, the products that got mostly negative ratings get filtered and discarded.